
Draught Proofing Melbourne
5.0 18 Google reviews
Serves Southbank and surrounding suburbs | Based in Southbank

Gaps around doors, windows, vents and fittings let warm air out and cold air in. Sealing them is one of the cheapest upgrades in the house, and one of the quickest to feel.
A common sign
“I can feel a breeze in the lounge even with every door shut.”
About draught and weather sealing
Draughts come from gaps around doors and windows, open wall vents, exhaust fans without dampers, old downlights and the places where pipes and cables come through. Each gap may be small, but together they can let a lot of air through.
A draught sealing specialist finds these gaps and seals them with weather strips, door seals, covers and fillers. A good one also knows which vents must stay open, especially if you have gas heating, which needs fresh air to run safely.
Cold breezes inside the house
Rooms that cool down quickly
Dust and noise getting in around doors and windows
A sealed home needs good ventilation in bathrooms and kitchens to keep moisture under control. Ask about exhaust fans while you’re sealing.

Not sure where to start?
Don’t waste money on upgrades you don’t need. A professional home energy assessment shows where your house loses heat and power, so your budget goes where it makes the biggest difference.
Find an assessor near meDraught sealing specialists
A few of the 46 listed across Australia

5.0 18 Google reviews
Serves Southbank and surrounding suburbs | Based in Southbank

5.0 538 Google reviews
Based in Thornbury

4.8 52 Google reviews
Based in Williamstown North

4.3 259 Google reviews
Based in Hume

5.0 83 Google reviews
Based in Ballarat
More in insulation and draughts
The cheapest work in the house, and the thing to do before you spend money on heating. Start here if the budget is tight.

The cheapest change you can make to how a house holds temperature, and the one most homes are still short on.

Older batts settle and thin out. Adding a layer over what is there costs a fraction of a full install.

Blown into the cavity of an existing wall without taking the room apart. Harder than a ceiling and worth more in a brick veneer.

For a house on stumps with a cold floor in July. Fitted from below, so the floor coverings stay where they are.

Old, damp, rodent damaged or non compliant material out first. Nothing new performs on top of it.
Before you choose an installer



Related goal
Draught sealing is one part of it. See the upgrades that stop draughts and heat loss, and which to do first.